Ref. 94 RT 8

Handling

-Electrolitic zinc covering following the ISO STandard ISO 9001:2000 and register number ESP 2274.

-Imprimación de poliuretano acrílico dos componentes:
· Repintable con cualquier tipo de sistema (sintéticos, poliuretanos, epoxies, etc.)
· Aspecto satinado
· Color RAL 8019

Finishing of plaited grille

The finishing of the Trenza Metal grille is simple.
It is possible to apply any kind of techniques of the metalwork: elctrode welding, wire welding, cut with shear, angle grinder, circular saw, bending, etc.

As it is solid material, and its thickness is higher than 4mm, it is possible to weld to every kind of solid frames or structural pipes from 1,5mm thick obtaining an excellent result.

Frames

Trenza Metal adapts to every kind of frame. Here you can see some possibilities.

Simple Frames

Flat bar On its side	Flat	H section
Tee Section Outwards	Inwards	U section Outwards	Lateral
Solid square section		Angle section Outwards	Inwards
Hollow square section

Composed pointed fence

Angle section and frame reinforcement		Hidden frame (reinforcement) and loose ends up and down
Of flat bar	Of angle section
With double flat bar		Hidden frame (reinforcement) and loose ends on the four edges
Pipe finish		Lateral Hidden frame (reinforcement) with angles section. Loose ends up and down
Angle section finish (weatherboard)

Anchorage

With drill hole in the frame to screw directly	With drill hole in the angle section to screw	With T-bolt to fix with resin
With bushing and drill hole moved from the axis of the frame to screw	Bent frame with bushing and drill hole in the axis of the frame to screw	With anchorage plate to screw
With flap, bushing and drill hole to screw	With flap and drill hole to screw. Security caps are placed on the head of the screw	With gusset plate and bushing to screw onto the floor